“Eyepiece Cases that say how much you love this hobby”
These distinctive, hand made, solid Red Oak, Eyepieces Cases are the ultimate in storage and display of your prized eyepieces and observing accessories.
They have a red LED lighting system, that is activated upon opening the lid, with on/off-brightness control. With the pull-out drawers, storage underneath, and the flip-down Plexiglas storage partition in the top, there is plenty of room for all your essentials. All cases are coated with Minwax Helmsman SPAR Urethane for a protective clear finish that offers long-lasting protection for the interior and exterior that is exposed to sunlight and dew. Available in one and two drawer models with many options available below to personalize the case to meet your needs.
The removable/replaceable eyepiece tray can be customized to match your eyepiece selection or you can choose from standard layouts.
For Custom layout instructions, see below.
One and Two Drawer Standard Layouts
Standard Two Drawer Eyepiece Case
Standard Two Drawer Eyepiece Case |
Celestial Two Drawer Eyepiece Case
Decorated on 4 sides with 3D celestial and planetary carvings.
Celestial Two Drawer Eyepiece Case |
Mythological Two Drawer Eyepiece Case
Decorated on 4 sides with 3D mythological (Perseus, Pegasus, and Centaurus) and astronomical symbols (Saturn and Shooting Stars).
Mythological Two Drawer Eyepiece Case |
Standard One Drawer Eyepiece Case
NEW! Larger Size
Standard One Drawer Eyepiece Case |
Celestial One Drawer Eyepiece Case
Celestial One Drawer Eyepiece Case |
Two Drawer Eyepiece Case Specifications
20″W x 10″D x 9″H.
Solid Oak with brass hardware.
Approximate Weight 12 lbs.
Automatic Red LED illumination when lid is opened.
On/Off Dimmer.
Side Drawers pull out for additional room underneath.
Hinged Plexiglas inside of lid for reference material.
Drawer upper storage 4-3/4″ x 8-1/4″ x 2″
Lower storage 5″ x 9″ x 3-3/4″
Eyepiece clearance 4 3/4″ upper 1 5/8″ lower
Lid storage 19″ x 8-3/4″ x 1-1/4″
One Drawer Eyepiece Case Specifications
14.5″W x 10″D x 9″H.
Solid Oak with brass hardware.
Approximate Weight 9 lbs.
Automatic Red LED illumination when lid is opened.
On/Off Dimmer.
Hinged Plexiglas inside of lid for reference material.
Drawer upper storage 4-3/4″ x 8-1/4″ x 2″
Lower compartment storage 5″ x 9″ x 3-3/4″
Eyepiece clearance 4 3/4″ upper 1 5/8″ lower
Lid storage 13″ x 9-3/4″ x 1-1/4″
Eyepiece Case Options
NEW!
NiteGlo-Constellation w/Personalized Monogram
Personalize your Wood Wonders Eyepiece Case with your choice of NiteGlo Constellation along with your 30 character monogram.
NiteGlo-ConstellationNiteGlo-Constellation w/30 Monogram |
Stain Option
Customize your Eyepiece Case with your choice of Minwax stain.
Stain Color Option |
Tablet Option
Your case truly becomes your workstation
Now you can take your tablet to your observing site in a secure and protected way that makes it easy to use. Your tablet is held in a pocket, attached to the Plexiglas, with a window cut out in the front. This allows access to your screen and power button.
Eyepiece Case Tablet OptionWhen ordered with new case. |
Table Retrofit
Retro-Fit Tablet MountReturn Shipping Included Must send your exsiting Plexiglas |
Eyepiece Case Heater Option
Wood Wonders has partnered with Kendrick Astro Instruments to provide dependable and efficient heat to keep your accessories warm in the coldest temperatures. Two of the Kendrick heating pads, along with the thermal properties of the wood, create a warm environment that provides quick recovery for cold optics. When your eyepieces fog up or get cold just put them back in the case for a few minutes and your back with a clear view in minutes. There is a standard female RCA jack mounted in the back of the case to connect to your due heater controller.
Eyepiece Case Heater Option |
Drawer Insert Option
The Drawer Insert is the ideal way to store your eyepiece adapters and also the Catseye Collimation Tools.
Drawer Insert |
Custom Eyepiece Layout
For a custom layout just draw a rectangle 7 7/8″ x 9″ on a sheet of paper and arrange your eyepieces as you wish. When you are satisfied trace the outline of the barrels onto the paper. Email me a .jpg and I can use it as template.
Replacement Eyepiece Trays
Replacement Eyepiece Tray |